bathroom vanity units with basin
By utilizing our researches, we are engaged in manufacturing a wide spectrum of Acrylic Solid Surface Sheet. The given sheet provide reliable and non slippery surface of any building. This sheet is designed by utilizing quality approved material and latest techniques accordingly with the customer's desires. Our offered sheet is best in quality & widely demanded among customers due to its smooth & shiny texture.
Solid surface basin Application
Kitchen/Bathroom: kitchen worktops with integrated sink, vanity countertop, bath tub etc.
Hospitality/Catering: bars, tables, reception desks etc.
Airports: check-in counters
Public buildings: displays in museums, facades, meeting tables etc.
Hospitals: laboratory counter tops, decontamination sinks, endoscopy etc.
Haishu wash basin package
~Every piece was inserted into a plastic bag
~Fixed with special design foam
~Then inserted into a carton ,Sellotape closed.
Removing Minor Cuts and Scratches
Because the beauty of acrylic solid surface goes all the way through, acrylic solid surfaces are renewable. You can remove minor cuts and scratches yourself by following these instructions. Deeper scratches may also be removed. but repair is best done by professionals.
First, wash the area where the scratch is located, following the instructions found in this guide, to remove any film on the surface as this film may clog the cleaning pads. With the surface still wet start rubbing with the blue colored side of the abrasive pad, using a light touch. Pressing too hard may actually leave deeper scratches.Rub
over the scratch using a straight line motion. Periodically switch rubbing direction ninety degrease, Rinse pad periodically during this process to remove any build up residue. Be sure all of the scratch is removed.
Clean top with water and dry thoroughly. Check to see that the ended area blends with rest of the top. Please note that sanded area may not perfectly match reminder of top. Rub over a large area to blend in sanding.
If needed, continue the sanding process using the blue colored pas and , if necessary, the gray color pad until the desired glass level is achieved Clean the top with water and dry thoroughly between each pad.
Rinse out all pads used and allow them to air dry before putting them away.